Lower center of gravity, and getting the shock piston in the correct position in the shock body are the main advantages of these Short Shock Flex Towers. We recommend starting on the outside location on the Front Tower, and 1 position from the outside on the Rear Tower. Camber link locations are the same as the stock Tekno, with an added lower position on the front tower.
Require a 107mm Front Shock
Require a 122mm Rear Shock (stock front shock)
Recommended Shock Build
Front : 107mm Shock Body / 107mm Shock Shaft / 107mm Shock Boot / +2mm Shock End, Unscrewed -3 turns / 73mm Shock Spring
Rear : 122mm Shock Body / 122mm Shock Shaft / 122mm Shock Boot / +2mm Shock End / 4mm Up-Travel Limiters (2 shock o-rings on the outside of the shock body)
